# Quick Answer: What Size Is A M8 Nut?

## Is m8 the same as 8mm?

All dimensions of the bolt (and nut) are a parameter of its basic diameter.

The “M8” refers to an approximation of the major diameter of the thread of 8mm – actually slightly less, like 7.9, as the sharp edges are rounded off..

## What is an m8 screw in inches?

Tap sizeBasic major dia (mm)Basic major dia (inch)M4 x 0.74mm.1575M5 x 0.85mm.1969M6 x 16mm.2362M8 x 1.258mm.315024 more rows

## What is a VESA m8 screw?

VESA MIS-E, C compliant displays are equipped with a 200 x 100 mm rectangular hole pattern, using M4 screws for attachment of the mount to the display. … M6 or M8 screws are used to attach the mount to the display.

## Is m6 or m8 bigger?

The size of a metric screw or bolt is specified as diameter, pitch and length, in millimeters (millimeters is abbreviated “mm”)….Table 3.MetricClosest InchM6-1.01/4-28 (Larger)M7-1.01/4-28 (Smaller)M8-1.255/16-18 (Smaller)M10-1.53/8-16 (Smaller)16 more rows

## What size spanner do I need for a m8 nut?

Metric Spanner SizesNominal SizeSpanner SizeM610mmM711mmM813mmM1017mm14 more rows

## How do I calculate nut size?

Stretch the tape measure across the nut’s diameter to the flat-side directly across from the one your pulling from. If the nut is metric, count the number of lines on the tape measure to find the measurement. If you count 9 lines, the size is a 9-mm (millimeter) nut.

## What does m8 nut mean?

The M before a number stands for metric. The next number is the diameter size. For example, M8 is a metric screw and has a diameter of 8mm.

## What does m8 1.25 mean?

For metric fasteners, you will see a M8 x 1.25 or an M8 x 1. For thread pitch, the distance between two points is the second number meaning the higher the number the fewer threads there are. This means the M8 x 1.25 is the coarse threading and the M8 x 1 is the fine thread.

## How long is an m8 screw?

M8 is the designation for a metric (M) sized bolt or screw that is 8mm (8) in diameter.

## What does m8 mean for screws?

The M before a number stands for metric. The next number is the diameter size. For example, M8 is a metric screw and has a diameter of 8mm.

## What size nut takes a 15mm wrench?

The standard wrenches needed are: 11,13,15,17,19,22,24,27,30,32,36mm. I believe that the bold that goes with the 15mm wrench is normally an M8. M8s usually use 12 or 13mm heads. Your list of wrenches may be true for whatever you work on, but the reality is that you need most sizes.

## What size is a #10 nut?

US Nut Size TableSizeDiameter*Hex NutMachine Screw Nut#6-5/16″#8-11/32″#10-3/8″17 more rows

## What size is a m8 bolt?

Tap sizeBasic major dia (mm)Basic major dia (inch)M8 x 18mm.3150M10 x 1.510mm.3937M10 x 1.2510mm.3937M12 x 1.7512mm.472424 more rows